Tablet Section Machineries
Pharmaceutical Processing Machines Following are the list of Tablet Section Machineries used for various processes in Pharmaceutical Industry.
Tablet Coating Machine
Pharmaceutical Processing Machineries
Pharmaceutical Granulators
Pharmaceutical Mixer
Tablet Press Section / Tablet Compression Machines
Tablet Coating Machine
Tablet Coating Machine with Mobile Hot Air Blower
Tablet coating machine is used for sugar and film coating of tablets, pallets, granules etc.
Sugar Coating / Film Coating:
- Auto Coater:
- Coating Pan:
Auto Coater: Auto Coater is provided with auto cleaning system, washing and rinsing equipment, equipped with spray nozzle, liquid discharge and perfect drainage system.
- 2 Bar S.S. 316/304 Construction
Complies to GMP regulation with close dimensional tolerance and free of cracks and crevices.
- Full Range of Coating Application
Aqueous .Solvent
Sugar Spray Gun configuration optimize the coating process.
- Precission Solution Spray System
Removable spray gun bar with solution tank highly accurate perisatic pump and imported spray guns.
- Automated Process Control
PLC control system for comprehensive controlling and recording of all key processing parameters
- Safety and Environmental Protection
Auto-coater is provided with special device to arrest all the powders as well as escaped coating material, neutralize the solvent gases, absolute air tight operation and no pollution in the production environment.
- Highly Efficient Process
Air Flow The unique perforated pan design utilizes a totally enclosed, highly efficient airflow system for maximum drying uniformity and minimum process air usage.
- Fast And Easy Cleaning
C.I.P System
- Material Handling System
Automated unloading system.
Inlet Air Unit |
|
Exhaust Air Unit |
- Prefilter
- Fine Filter
- Pre balanced air in SS construction
- Air heating Battery
- SS Filter
- Steam & Pressure indicators on fixed SS ducts
- Auto/manual dampers for air volume regulation and sugar/film applications.
|
- High pressure, pre balanced fan
- Air volume control auto/manual dampers
- Interlock temperature & pressure indicators
- Quick clamps for easy removal/ dismantling leading to faster changeovers and cleanups for GMP
- Optional wet/bag type scrubbing/ dedusting units available with solvent recovering systems
|
Optional |
- In built CIP system
- FLP electrical construction
- Touch Screen, interactive, programmable electronic panel with graphic display
- Scrubber for exhaust
|
Also available the entire range of equipments for powder preparation, capsulation and sterilisation and tabletting injectables and topicals and packaging.
Coating Pan: In the process of coating tablets and confectionaries, the personal skill of the coater needs to be supplementedby a correctly designed, versatile coating pan. The standard pan is elliptical in shape, mounted at 30° angle. Pans in other geometrical shapes and mounting angles, as per requirement, are also manufactured. RPM of the pan is variable. Hot air blower thermostat controlled, to deliver required quantity of air at selected temperatures between 40°C to 80°C is provided.
SPECIAL FEATURES
- In the Tablet Coating Machine, the Coating Pan can be mounted on Motor Drive unit via efficient worm Universal Gear (UG), which permits Coating pan to be held at any angle up to 45° with reduction in speed.
- A combined fan & motor unit together with an attached heating unit make up the hot air blower.
- Totally enclosed and running in an oil bath.
- Facility of drying attachment with adjustable height
- The maximum operational capacity is 30 % of coating pan volume.
- The flexible and adjustable air flow pipe allows for suitable positioning in the pan and easy withdrawal for loading or unloading.
- The flow of air in this unit is not controlled by the speed of the pan; the hot or cold air can be blown as required.
- The coating pan is suitable for screwing on all main drives.
- Interlocked electrical circuit so that heaters can be operated only after blowers are made ‘ON’ to avoid burning of heaters.
- Protection plates prevent oil escaping and dust and syrup from entering the bearing.
- Mechanical timer can be incorporated as optional attachment.
- Needs no foundation; can be installed on properly pre-levelled floor.
- Compact hot air blower with inlet air damping arrangement through filter.
- Easy mounting arrangement for change over from Coating Pan to Polishing Pan
Other models available with :-
Titling mechanism to adjust angle of pan-polishing pan with canvas lining with quick and easy mounting on to drive hub.
OPTIONAL: GMP models available with all contact parts in AISI 316 quality and mild steelcast iron parts outside cladded with AISI 304 quality stainless steel.
PACKAGING SPECIFICATIONS |
MODELS |
18" CP-450 |
36" CP-900 |
48" CP-1200 |
60" CP-1500 |
Loading Cap. (Final Wt.) |
25 Kgs.
|
75 Kgs. |
125 Kgs. |
175 Kgs. |
Drive Motor (HP) |
0.50
|
1.00 |
3.00 |
5.00 |
Hot AI R Blower Motor |
0.25 |
0.50 |
1.00 |
2.00 |
Blower Capacity Maximum CFM |
100 |
200 |
500 |
750 |
Pan Mounting |
Fixed Angle |
Fixed Angle |
Fixed Angle |
Fixed Angle |
Pharmaceutical Processing Machineries
Fully Automatic Tablet Counting & Filling Machine
- Fully Automatic Tablet Counting & Filling Machine is suitable for counting and filling hard gelatin capsules, soft gels, coated tablets, tablets, bean or ball shaped objects, round pills and other solid material.
- It accurately senses all shapes and sizes of tablets, capsules, caplets, soft gels and clear soft gels.
- Change over from one set of filling parts to another and from one object-shape to another can be done in a few minutes. Tablet and Capsules are counted using filling or counting tracks.
- The counter series adopts three step vibration plates to in feed tablets or capsules; vibrating frequency is adjustable for quick and stable in feeding.
- Bottle is positioned by cylinder to ensure accuracy positioning prior to filling. Dynamic photoelectric detecting technique, accurate counting.
- Gate array technique of high reliability and computer controlled.
- Tablet Counting & Filling Machine with PLC interface operates extremely simple and easy to maintain and clean.
Semi Automatic Tablet Counting Machine
- Semi automatic tablet counting machines assume an important role in the pharmaceutical industry. Semi Automatic Counting Machine is very useful to Pack Tablets and Capsules in Loose form.
- Semi automatic tablet counting machine is very simple, maintenance free for high accuracy.
- High speed counters ensure 100% accuracy and are suitable for all types of tablets. The High speed counter of Tablet Counting Machine is equipped with vibratory feeder to align the products for transporting them from the product hopper to the detection unit.
- In the detection unit, products are scanned and counted with accuracy.
- An additional equipment such as Dust extraction and collection equipment provide an efficient way of removing capsule dust and other particles.
- Air operated cylinders in the machine collect and fills the accurate number of products into containers. A specially designed nozzle helps the chance of product spillage.
- High technology counters also have process monitoring sensors and product reject system.
- Heavy Duty Gear Box for long life smooth operation of Semi Automatic Tablet Counting Machine.
|