Pharmaceutical Machinery

Pharmaceutical Mixer

Single Cone Blender

• The baffle lid & conical shape of the container help uniform mixing and easy discharge.
• Totally enclosed system allows that the G.M.P. Is followed as closely as possible and it avoids cross contamination & pollution of the environment.
• Digital Timer For automation.
• Has a built in Mucon valve at the bottom for easy discharge.
• No guard - No start device for safety.
• The I.P.C.s are stackable and can be mounted on any filling or compression machine.

Cage Blender

The Cage Blenders system is a fourth Generator system designed as an integral cycle system from formulation to utilisation. It involves mixing and batch identification of the product during intermediate steps inside the same hermetically sealed container. This system allows that the G.M.P. is followed as closely as possible (no cross contamination, no position of the environment)

Salient Features

(I) S.S.BINS

• The material of construction will be SS-304/SS 316.
• The bins are stack able one over the other and shall have complete stability.
• The bins can be lifted stacked and transported by Fork Lift Trucks.
• The charging hole with cover is provided on top with quick opening & closing arrangement.
• Each bin has a built-in butterfly valve 200 mm dia at the bottom suitable for powder discharge.
• The bins are highly polished from inside & outside.

• A MS/SS Fabricated structures with 2 shafts mounted on plummer blocks it is coupled to the drive consisting of motor and gear box of required size.
• Between motor and gear box a fluid coupling to take care of starting torque is provided.
• The motor shall be flame prooCTEPC, foot mounted. 1000 RPM Crompton/Siemens make. The gearbox shall be radicon, ratio 50:1, the sizes of motor & gear box, shall be to suit your size requirements.
• Manual inching arrangements to bring the cage in position is provided.
• The design of the cage and the supporting structure is such that the bins can be loaded & removed from the cage by means of fork lift trucks thereby eliminating manual handing.
• The provision of locking arrangement for the door & clamping of bins firmly is completely tool proof.
• A suitable fencing around the cage is provided with an entry point for the fork list. A limit switch is incorporated in the electrical circuit to prevent the operation of the cage when the door is open.
• The whole MS Structure shall be painted with suitable colour.

(III) MS Trolleys

• The base frame shall consist of MS Angle iron with a plate top.
• It shall have 2 nos. Fixed type & 2 nos. Swivel type castor wheels.
• A fixed handle mode out of MS Pipes shall be provided for easy movement of trolleys.
• It shall be given 2 coats of red oxide primer and 2 coats of enamel paint of suitable colour.